Refinish stock or not?
Refinish stock or not?
Found this Sterlingworth from 1926 (sn109XXX) a few weeks ago. I would like to take it hunting but as you can see there is bare spots on the stock I don't want to expose to the elements. Is it OK to refinish and enjoy the gun, or is that a no-no?
-
bamboozler
- Posts: 379
- Joined: Fri Jan 05, 2007 8:52 pm
- Location: Wisconsin
- Has thanked: 3 times
-
Silvers
- Posts: 5143
- Joined: Sat Jan 06, 2007 9:28 pm
- Location: Between Phila and Utica
- Has thanked: 1169 times
- Been thanked: 1764 times
A little different perspective on this. I don't think your stock is that bad and I wouldn't refinish it. Most of us can chose when to hunt; if it's raining that hard - take out a beater or a take-apart gun like a semi or pump that can be dried and cleaned easily. Back to your stock, if it were my gun I'd use some good gunstock wax to help seal the exposed wood and let go at that. All that wear was earned honestly. Silvers
-
fox-admin
- Site Admin
- Posts: 4110
- Joined: Fri Jan 05, 2007 4:46 pm
- Has thanked: 736 times
- Been thanked: 2053 times
-
gspspinone
- Posts: 14
- Joined: Sat Oct 25, 2008 8:12 pm
- Location: CT
I had a similar dilemna, although my stock wasn't quite so marred up. I roughed it up very lightly with 0000 steel wool and then put a couple of light coats of truoil on it. Lastly, 2 coats of wax.
The truoil blended in with the original stock finish well, and sealed the bare spots. Stock looks much better and maintains a period look and it is now weather proofed.
The truoil blended in with the original stock finish well, and sealed the bare spots. Stock looks much better and maintains a period look and it is now weather proofed.
“The things that will destroy America are prosperity at any price, peace at any price, safety first instead of duty first and love of soft living and the get-rich-quick theory of life.â€
-
mike campbell
- Posts: 385
- Joined: Sun Jan 07, 2007 3:29 pm
There ya go! Why put a bandaid on it and let it fester when you can heal it?gspspinone wrote:I had a similar dilemna, although my stock wasn't quite so marred up. I roughed it up very lightly with 0000 steel wool and then put a couple of light coats of truoil on it. Lastly, 2 coats of wax.
The truoil blended in with the original stock finish well, and sealed the bare spots. Stock looks much better and maintains a period look and it is now weather proofed.
Beware the man with one gun...he likely will bore you to death in others ways, too.
Mike
IMO you hit it right on the head. The finish on this gun is blistering off, it's a Sterlingworth that is a shooter. Strip the finish, give a good acetone soak, raise the dents and give it a good re-finish. Then it will be good to go for another sixty plus years.
I'd be very careful what type of wax I'd use on this. There is bare wood showing and the wax will fill the pores. Many types of waxes have silicone in them and if you do want to re-finish it in the future. The silicone may cause fish eye problems and be a bear cat to get a good refinish. This is also why I never use a silicone oil on my guns.
IMO you hit it right on the head. The finish on this gun is blistering off, it's a Sterlingworth that is a shooter. Strip the finish, give a good acetone soak, raise the dents and give it a good re-finish. Then it will be good to go for another sixty plus years.
I'd be very careful what type of wax I'd use on this. There is bare wood showing and the wax will fill the pores. Many types of waxes have silicone in them and if you do want to re-finish it in the future. The silicone may cause fish eye problems and be a bear cat to get a good refinish. This is also why I never use a silicone oil on my guns.
Life Member A.H. Fox Collectors Association Inc.
Id just hand rub a couple of coats of tung oil into the bare spots...water proofs pretty good without showing like a finish....then put a coat or 2 of wax on the stock B4 hunting it....TRE-Wax works well....
Everything still shows original hunting wear but with better between hunt cleaning/storage care.....
Everything still shows original hunting wear but with better between hunt cleaning/storage care.....
gunut
-
THE FOX
refinish?
Hi all!
I guess that I am the newest member to join in this group....and I am thrilled to death to find so many people who like Foxes as I do. I have carried a fox ever since early teenage years, and still have my first one which is a 16 ga sterlingworth. (I am 71 years old) When I started collecting them , I couldn't decide on the refinish question. So after a while, I said to heck with it, I am going to fix it like I enjoy it and not for someone else! The way I see it, unless it's a real rarity and in pristine condition, I go with a refinish job, and that being with about 15 coats of tru-oil. When I get one finished, all pores are filled in. Slick as a piece of glass! That"s my two cents worth. Everyone be safe over the holidays, and I certainly look forward to swapping ideas with you.
Bryan E. Clary
I guess that I am the newest member to join in this group....and I am thrilled to death to find so many people who like Foxes as I do. I have carried a fox ever since early teenage years, and still have my first one which is a 16 ga sterlingworth. (I am 71 years old) When I started collecting them , I couldn't decide on the refinish question. So after a while, I said to heck with it, I am going to fix it like I enjoy it and not for someone else! The way I see it, unless it's a real rarity and in pristine condition, I go with a refinish job, and that being with about 15 coats of tru-oil. When I get one finished, all pores are filled in. Slick as a piece of glass! That"s my two cents worth. Everyone be safe over the holidays, and I certainly look forward to swapping ideas with you.
Bryan E. Clary
-
mike campbell
- Posts: 385
- Joined: Sun Jan 07, 2007 3:29 pm
-
mc15426378
- Posts: 739
- Joined: Fri Sep 26, 2008 11:23 pm
- Location: Mississippi