Pair Of Fox's Found Today{Update More Pics}

[mc15426378]

Researcher

The 5 guns you believe the butt plates are original/correct...what gauges are they?

What is the spacing of the screws?

Mike

[Researcher]

12, 20, 12, 12, 20.

The screw hole spacing on all five are a strong 3" maybe 3 1/64" or 3 1/32"

I see the A.H. Fox repro butt plates CSMC offers have hole spacing of 3 23/32" and 2 15/16" ?!?

http://www.csmcspecials.com/A_H_Fox_But ... /pb100.htm

http://www.csmcspecials.com/A_H_Fox_But ... /pb110.htm

In the case of the A-Grade 12-guage originally in question here, it doesn't have an original A.H. Fox Gun Co. stock anyway so its plugs and hole spacing don't really count.

[mc15426378]

Thanks Researcher. The smaller spaced plate I bought from CSMC/Galazan is definitely a very strong 2 15/16"
(I measured it as a strong 3" ) hole spacing. When I was fitting the new plate after the existing holes were plugged (including the bigun) there was just a smidge of a difference in the plugged hole spacing vs the CSMC plate spacing.

One of our other members installed the larger sized plate on one of his guns and I believe this plate had
3 3/4" hole spacing.

BTW. For bending the new plate to fit the stock contour...three 5 minute soaks in some hot tap water....a few more minutes for messaging....and the repop fit nicely. Very easy job.


Mike