Correct pad

Post your questions or seek advise regarding gunsmithing, restoration, repairs, ballistics, etc, etc.
Commercial operations or businesses may not advertise nor appear to advertise their products or services, either directly, or indirectly by a second party, except for simple reference as a source for such products or services
Post Reply
1steve7301
Posts: 63
Joined: Mon Aug 25, 2025 11:11 am
Has thanked: 148 times
Been thanked: 111 times

Correct pad

Post by 1steve7301 »

I am looking at a Utica Sterly 20 Gauge deluxe with Phylly features. It has a bad pad that needs replacement. What would this gun have come with for a pad? Thanks, Steve Hodges
Top
Researcher
Posts: 6201
Joined: Sun Jan 07, 2007 7:18 pm
Location: WA/AK
Has thanked: 451 times
Been thanked: 2408 times

Re: Correct pad

Post by Researcher »

The Jostam Anti-Flinch, the pad that hasn't been reproduced.
Fox-Sterlingworth Deluxe intro January 2, 1930.jpg
Fox-Sterlingworth Deluxe intro January 2, 1930.jpg (29.71 KiB) Viewed 1484 times
Share the knowledge
Top
User avatar
Silvers
Posts: 5149
Joined: Sat Jan 06, 2007 9:28 pm
Location: Between Phila and Utica
Has thanked: 1170 times
Been thanked: 1776 times

Re: Correct pad

Post by Silvers »

Steve, if it were me I wouldn't waste my time looking for a vintage Jostam 6-slot. Almost impossible to find in NOS/unfitted condition and still soft, and even then it can never be fitted to pass as original and especially so if the butt on that gun had its original concave surface sanded straight for the pad that's currently on it. Just a suggestion ..... a "No Shoc" pad is ~ period correct and its modern Galazan repro is relatively inexpensive, readily available and it can be faux aged to look good. frank
Aan
Top
Macklew2
Posts: 33
Joined: Tue Jan 20, 2026 10:39 am
Location: Hamilton MI
Has thanked: 2 times
Been thanked: 2 times

Re: Correct pad

Post by Macklew2 »

Silvers wrote: ↑Thu Aug 13, 2026 7:46 am Steve, if it were me I wouldn't waste my time looking for a vintage Jostam 6-slot. Almost impossible to find in NOS/unfitted condition and still soft, and even then it can never be fitted to pass as original and especially so if the butt on that gun had its original concave surface sanded straight for the pad that's currently on it. Just a suggestion ..... a "No Shoc" pad is ~ period correct and its modern Galazan repro is relatively inexpensive, readily available and it can be faux aged to look good. frank
Be careful on the Galazan pad. I ordered two of them and they were so large, they could not be ground to fit without getting into the "slotted" part pf the toe and heel.
Top
User avatar
Silvers
Posts: 5149
Joined: Sat Jan 06, 2007 9:28 pm
Location: Between Phila and Utica
Has thanked: 1170 times
Been thanked: 1776 times

Re: Correct pad

Post by Silvers »

Macklew2 wrote: ↑Tue Aug 18, 2026 3:11 pm
Silvers wrote: ↑Thu Aug 13, 2026 7:46 am Steve, if it were me I wouldn't waste my time looking for a vintage Jostam 6-slot. Almost impossible to find in NOS/unfitted condition and still soft, and even then it can never be fitted to pass as original and especially so if the butt on that gun had its original concave surface sanded straight for the pad that's currently on it. Just a suggestion ..... a "No Shoc" pad is ~ period correct and its modern Galazan repro is relatively inexpensive, readily available and it can be faux aged to look good. frank
Be careful on the Galazan pad. I ordered two of them and they were so large, they could not be ground to fit without getting into the "slotted" part pf the toe and heel.
The pad I suggested to Steve is the Galazan repro "No Shoc" pad which is solid (no vent holes) and is properly sized for a Fox smallbore or regular 12-gauge gun. However Brad's post seems to refer to the Galazan repro Hawkins heart vent pad which are giganto sized. frank
Aan
Top
Post Reply

Return to “"Technicana" and Restoration Forum”