Fox Sterlingworth for Turkey Hunting

NO ITEMS MAY BE POSTED FOR SALE ON THIS FORUM or direct references to items for sale. This includes, but is not limited to, the following: A personal item that’s obviously for sale or would appear to be for sale; or if a link is posted to some other site where the item is for sale. Please note that references to items posted elsewhere are ok for discussion as long as a direct link is not included. Any "Wanted to Buy" posts are not allowed and will be removed. The moderators will delete any posts that are deemed offensive, abusive or slanderous in nature. Commercial operations or businesses may not advertise nor appear to advertise their products or services, either directly, or indirectly by a second party, except for simple reference as a source for such products or services
Post Reply
TheNakedGun
Posts: 14
Joined: Fri Jun 08, 2007 3:18 pm
Location: FL
Contact:

Fox Sterlingworth for Turkey Hunting

Post by TheNakedGun »

I was wondering if anyone has used a fox sterlingworth for Turkey hunting and what loads would be safe to use in My sterlingworth. It is a 12ga with 28" barrels I would appreciate any information that anyone could provide.

thanks.
Twice Barrel

Re: Fox Sterlingworth for Turkey Hunting

Post by Twice Barrel »

Turkey hunting requires the tightest patterns possible to get the maximum number of strikes in the relatively small head and neck area. Since it seems that all shotgun barrels seem to prefer different loads for maximum pattern density on target I would recommend that you pattern several loads and choose the one that produces the tightest pattern. As far as safe loads go Fox guns are pretty stout and can handle pretty stiff loads, however, I would recommend nothing heavier than one and one quarter ounce loads at 1200 fps to save wear and tear on your gun as well as your shoulder and it has been my experience that slower loads pattern better than ultra hot loads in my guns. Shot sizes is a matter of preference, some hunters prefer smaller shot sizes (#6s & #7s) for maximum hits while others swear by larger shot sizes (#2s and #4s) for maximum penetration.
TheNakedGun
Posts: 14
Joined: Fri Jun 08, 2007 3:18 pm
Location: FL
Contact:

Re: Fox Sterlingworth for Turkey Hunting

Post by TheNakedGun »

Thanks for the information it really helped what I was basically wondering is if the Fox could handle the modern Turkey loads.
vaturkey
Posts: 3580
Joined: Wed Nov 26, 2008 6:33 pm
Location: Hamilton, VA
Has thanked: 1015 times
Been thanked: 1458 times

Re: Fox Sterlingworth for Turkey Hunting

Post by vaturkey »

TheNakedGun wrote:Thanks for the information it really helped what I was basically wondering is if the Fox could handle the modern Turkey loads.
I'd think a modern 2 3/4" 1.5 oz turkey load might be hard on a sterlingworth unless it was the heavier made Superfox clone. I had a 2 frame Parker 12 gauge restored with the original wood which included glass bedding the buttstock to the receiver. Restorer was Bill Schwarz in Ga. Bill's proof loads were 2 3/4" Winchester Turkey loads. I asked him if he recommended shooting those on a regular basis and he said "Hell no", that's why he called them his proof loads. I'd think sticking with the 1 1/4 oz loads would be the prudent thing to do, as I believe (perhaps incorrectly) a Parker on a 2 frame is stronger then a Fox Sterlingworth (except the one built on the Super Fox frame).
TheNakedGun
Posts: 14
Joined: Fri Jun 08, 2007 3:18 pm
Location: FL
Contact:

Re: Fox Sterlingworth for Turkey Hunting

Post by TheNakedGun »

I have some 12 ga 2 3/4" 1 1/8 oz #6 shot I am going to try in it and see how they pattern.
Post Reply