Utica-Fox Sterlingworth-Quoted Price Reasonable?

NO ITEMS MAY BE POSTED FOR SALE ON THIS FORUM or direct references to items for sale. This includes, but is not limited to, the following: A personal item that’s obviously for sale or would appear to be for sale; or if a link is posted to some other site where the item is for sale. Please note that references to items posted elsewhere are ok for discussion as long as a direct link is not included. Any "Wanted to Buy" posts are not allowed and will be removed. The moderators will delete any posts that are deemed offensive, abusive or slanderous in nature. Commercial operations or businesses may not advertise nor appear to advertise their products or services, either directly, or indirectly by a second party, except for simple reference as a source for such products or services
vaturkey
Posts: 3583
Joined: Wed Nov 26, 2008 6:33 pm
Location: Hamilton, VA
Has thanked: 1016 times
Been thanked: 1460 times

Re: Utica-Fox Sterlingworth-Quoted Price Reasonable?

Post by vaturkey »

BarkeyVA wrote:Did your gun come from the factory with those chokes or did you have the bores opened up? I asked the dealer a similar question about the gun in question. He said that the right barrel choke measures 2 3/8" of taper, left barrel measures 2 3/4" taper. Do those measurements indicate it is original or suggest that it has been altered? If it was altered, should I be concerned?

As for photos, I do not know how to post them. However, I'd be interested in your opinion. Please provide your email in a PM and I'll be happy to forward them to you.
I think this was directed at me. Yes, I had them opened up to that for Grouse/Woodcock. As they came they were about .30 and.20 constriction or full/mod. I currently have a 30" 16 and it is choked full/mod.
BarkeyVA
Posts: 23
Joined: Sun May 02, 2010 7:35 am

Re: Utica-Fox Sterlingworth-Quoted Price Reasonable?

Post by BarkeyVA »

This is a repeat of my post on the Technicana forum.

I shot my 16 ga. Fox Sterlingworth, 28" barrels choked .006/.012, for the first time today. Using the hood of my pickup and 4 towels as a rest, I shot 4 patterns from each barrel at 20 yds with 1 oz game loads to check POI. By inspection, both barrels are putting about the 60% of the patterns above POA. The center of the pattern from the left barrel is about 4" to the left of the POA. (Not sure if that is too much or not) I shot two more patterns from each barrel at 10 yds. Again, the patterns are about 60/40 and the left barrel shoots slightly to the left.

I then shot two rounds of wobble clays (5 stations in an arc even with the wobble trap. Station 3 is on a platform above the trap.) They shoot one single and two report doubles at each station and most shots are from 20-35 yds. Shooting low gun exclusively , I missed 3x5 on station 1 and finished with 20x25 for the first round. The second round, I hit 22x25, including missing the first bird on the last report pair at station 5. My scores were about average for me, so I can't complain about the gun or the results. I think it will be a decent upland bird gun.

Posts: 11
Joined: Sun May 02, 2010 6:35 am
Private message
Post Reply