New Fox Owner....
Posted: Mon Feb 16, 2015 10:40 am
I happened to run across what appears to be a pretty nice Fox Sterlingworth in 16ga on Armslist last week, and jumped on it.
Serial# is 361000.... Not sure if that means anything as far as value, I originally thought from the pics the guy sent, that it was 351000, which according to what I saw, would have been the last gun made in 1913, first year of the 16bore guns.
Anyway.... The gun is currently being shipped to me, and I don't have my hands on it yet. The guy selling it was a tacticool arms dealer, selling it on consignment, and really was not familiar with old shotguns. From the pics I got, looks like the trigger guard still has a lot, if not more of the blue. Where the serial # is, it's worn off though. The receiver still has a lot of case color, and he said that someone had actually commented on how much of it it still had. He said bores are still bright and shiny, and no surface pitting, etc. Only issue I know for sure, is that the butt plate is chipped. It's the hard black plastic one. The wood appears to be in good shape, it's nothing fancy, but I don't see any chips or deep dings. And, he said only thing on the wood, was some worn finish...
My only questions is, depending on it's overall condition.... Is, do I try to keep it as close to original, or do I do some mods on it. Considering a restock with nicer wood, and beavertail fore arm... (I'd keep the original wood). As for a re-blue of the barrel.... I hear horror stories about having this done, and hope that I am happy with it the way it is... My plan is to use this gun for pheasant, sporting clays, etc. 28" barrels, I assume m/f. I am also assuming 2 9/16" chambers as it's a 1927 gun. I have ordered some 2.5" shells from RST for it. Since it's just a sterlingworth, and not a graded gun... I am leaning towards turning it into my goto shotgun for shooting pheasant, and sporting clays when I am in the mood to shoot a SxS.... But, if it's in nicer than I think original condition... I will have a hard time doing anything but replacing the butt plate...
I also just picked up an Ithaca NID from a friend, and it's in perfect Mechanical condition as well. 16ga 26" barrels m/f chokes, made in 1926.
These old american doubles can be addicting, and I am just getting started...
Serial# is 361000.... Not sure if that means anything as far as value, I originally thought from the pics the guy sent, that it was 351000, which according to what I saw, would have been the last gun made in 1913, first year of the 16bore guns.
Anyway.... The gun is currently being shipped to me, and I don't have my hands on it yet. The guy selling it was a tacticool arms dealer, selling it on consignment, and really was not familiar with old shotguns. From the pics I got, looks like the trigger guard still has a lot, if not more of the blue. Where the serial # is, it's worn off though. The receiver still has a lot of case color, and he said that someone had actually commented on how much of it it still had. He said bores are still bright and shiny, and no surface pitting, etc. Only issue I know for sure, is that the butt plate is chipped. It's the hard black plastic one. The wood appears to be in good shape, it's nothing fancy, but I don't see any chips or deep dings. And, he said only thing on the wood, was some worn finish...
My only questions is, depending on it's overall condition.... Is, do I try to keep it as close to original, or do I do some mods on it. Considering a restock with nicer wood, and beavertail fore arm... (I'd keep the original wood). As for a re-blue of the barrel.... I hear horror stories about having this done, and hope that I am happy with it the way it is... My plan is to use this gun for pheasant, sporting clays, etc. 28" barrels, I assume m/f. I am also assuming 2 9/16" chambers as it's a 1927 gun. I have ordered some 2.5" shells from RST for it. Since it's just a sterlingworth, and not a graded gun... I am leaning towards turning it into my goto shotgun for shooting pheasant, and sporting clays when I am in the mood to shoot a SxS.... But, if it's in nicer than I think original condition... I will have a hard time doing anything but replacing the butt plate...
I also just picked up an Ithaca NID from a friend, and it's in perfect Mechanical condition as well. 16ga 26" barrels m/f chokes, made in 1926.
These old american doubles can be addicting, and I am just getting started...




